Blowing dry materials and liquids with state-of-the-art air conveying technology
The modern blowing technology of our Amphtitec Vortex suction excavator with an b ensures efficient processes for distributing free-flowing and liquid materials to your destination.
Air conveying capacity of up to 9,000 m³/h at a vacuum of 0.97 bar, tank capacity of the vehicle body: 14 m³, drive power: 390 kW, and mounted on a 4-axle chassis. Blowing occurs at a maximum pressure of 1.0 bar and an air flow of 2,500 m³/h. The filter unit is also approved by the German Federal Institute for Industrial Engineering (BIA) for extracting asbestos fibers or other carcinogenic substances. Conveyor lines up to 200 m long and 75 m high.
The latest vehicle technology, the high-lifter on the tank, enables dust-free transfer from the vehicle tank into big bags, drums, or containers. The vehicle tank can be raised to a height of approximately 1.80 m.
Cyclone separators or vacuum troughs can be connected between the product and the vehicle to fill these containers and transport them away from the construction site. Water nozzles can be installed between the suction line to wet the product and enable further dust-free processing.
Bulk materials, liquid or solid, can be conveyed pneumatically from the vehicle tank via pipes and hoses, e.g.,
Substrates on flat roofs; materials in silo systems.
Materials recovered during accidents can be transferred to silo vehicles.
Would you like to learn more about pneumatic conveying technology? Are you looking for a solution for a specific project?
Rent a suction excavator now
